PRACTICAL FEATURES:
+ Our reflector ensures added visibility and safety
+ A daisy chain allows for the attaching of a rear light

Compatibility notice
You can easily check if your saddle is compatible:
1. The saddle rails must have a bend of at least 34°.
2. The seat post clamp must be at least 13 mm from the middle of the bend in the saddle rail. There must also be at least 13 mm from the middle of the bend to where the rail connects to the back of the saddle.
3. The bottom edge of the saddle (at the side) must be at least 14 mm higher than the bottom edge of the saddle rail.

The following products are not suitable:
+ Saddles with carbon fiber rails
+ Suspension seatposts
+ Saddles with unusual saddle rails e.g. SQLab Active, Brooks B67 (see point 2 above)
+ Electronic dropper posts e.g. Rock Shox AXS or Magura Vyron